BioHack AcademySyringe Pump Materials
The material list is based on the Requirements list
Bill of Materials
You will need an Arduino UNO or similar microprocessor.
Must have
| # | Amount | Description | Supplier NL | Cost |
|---|---|---|---|---|
| 1 | 1 | NEMA17 Stepper motor | RepRapWorld | 12.50 |
| 2 | 1 | Pololu Stepper Driver | RepRapWorld | 11.99 |
| 3 | 1 | 8mm smooth rod | RepRapWorld | 2.99 |
| 4 | 2 | LM8UU Linear Bearings | RepRapWorld | 1.99 |
| 5 | 1 | Axis coupling | RepRapWorld | 3.99 |
| 6 | 1 | M5 threaded rod | RepRapWorld | 1.99 |
| 7 | 3 | Hexagonal M5 nut | RepRapWorld | 0.01 |
| 8 | 1 | 100 uF capacitor | RepRapWorld | 0.20 |
| 9 | 1 | Rotary encoder | iPrototype, Farnell, EOO | 0.60 |
| 10 | 1 | Knob | Farnell, (EOO + EOO) | 0.23 |
| 11 | 1 | Button | iPrototype, EOO | 0.55 |
| 12 | 2 | 10K resistor | Farnell, EOO | 0.12 |
| 13 | 2 | 10nF capacitor | EOO | 0.2 |
| 14 | 2 | 100nF capacitor | EOO | 0.24 |
| 15 | 1 | 12V 5A Power supply | Farnell, EOO | 20.00 |
| Total costs |
You will also need:
- 60 mL syringe, make sure you adjust the mount according to the dimensions of your syringe!!
- 3mm MDF and some M3 10 mm bolts and nuts
Nice to have
| # | Amount | Description | Supplier NL | Cost |
|---|---|---|---|---|
| 1 | 1 | I2C LCD 16x2 Display | iPrototype, (HobbyElectronica + HobbyElectronica) | 16.95 |
| Total costs |
Alternatives